Advise on K3800 setup.

I have been eyeballing the ridgid k3800 53117 with 3/8" cable. I would also get the 55002 drum with the 37862 1/2" cable and to top it off a sink drum with 1/4" cable. I figure the 1/2" is perfect for floor drains and 2" laundry drains, the 3/8" would be good for kitchen and lav drains and other 11/2" and lastly the 1/4" would be good for going through a tub overflow or a crusted up galvanized 11/4". Those are the sizes we work with at the shop but with different machines. I'm already convinced that I should get the k3800 machine and extra drums with different size cables. I saw that rigid has their spring promo and it means that if I buy the k3800 53117 I would get the sinkdrum 55012 for free. That sink drum comes with a 25' 5/16" cable.

My question would be if that 5/16" cable is good for tub overflow and 11/4" galvanized pipe?

If the 5/16" can do the job of the 1/4" I was planing on buying then I would not have to buy the 1/4" cable.

I also see they have integral wound and inner core cables. What is the difference and what kind would you recommend for my described setup?

Any suggestions on the setup I have described or the cables?

Sent from my BLN-L24 using Tapatalk

Via RSSMix.com Mix ID 8247361 http://www.rssmix.com/